Diamond® FSK Hot Melt Foil Tape
Diamond® FSK Hot Melt Tape (Foil + Scrim + Kraft Paper) is coated with a Strong Hot Melt adhesive and Laminated with release liner suitable to be used for a wide range temperatures.
- Low moisture content of these products makes these tapes as a good sealant.
- The Aggressive Solvent base Adhesives offer for long serviceable life in outdoor as well as high humid atmosphere.
- Its aluminum reinforced substrate gives it exceptional tensile strength. So engineers prefer it for high quality seaming and sealing of fiber glass duct insulation and pipe insulation.
- Best Result Obtained when its applied to clean and dry surfaces.
- Lamination for air conditioning ducting systems.
- To Join Foil faced & rock wool.
- Sealing of double glazing units.
- Roofing Application like flashing, joints and insulations.
- Duct sealing and joining for refrigerator and excellent barrier to vapor General purpose holding ,patching sealing applications-indoor and outdoor.
Properties | Specifications | ASTM Test Method |
Backing Thickness | 95 ± 5 micron | D-3652 |
Total Thickness | 125 ± 5 micron | D-3652 |
Adhesion To Steel | 1800 gms / inch | D-3330 |
Tensile Strength | 12000 gms / inch | D-3759 |
Elongation at Break | 5% | D-3579 |
Shear Test | >96 hours | D-3654 |
Tack Roll Ball | 150 mm | D-3121 |
Temperature Range | -5℃ to 55 ℃ |
Backing | Adhesive | Color | Liner |
Foil + Scrim + Kraft (FASK) | Hotmelt | Shiny Silver | White Release |
Standard Sizes | ||
Width (mm) | Length (yd) | Rolls / Box |
48 | 30 | 24 |
72 | 30 | 16 |
96 | 30 | 12 |
Application Instructions:
Before applying, the surface must be free from oil, solvent, water and dust. For best product performance, apply the tape at room temperature between 15°C and 35°C.
Storage:
Storage under normal room temperature and 50% RH in the original packing.
Product Expiry:
Use within 12 months from the date of manufacturing.
Note: The values provided above are results of standard lab tests and are subject to variations. Users are to determine the suitability of the product for its intended purpose
